“胡氏6S油性脱模剂塑粒内外脱模剂模具清洗剂诚招代理商”参数说明
是否有现货: | 是 | 认证: | SGS/ISO90001 |
类型: | 硅系列 | 作用方式: | 内脱模剂 |
形态: | 溶剂型脱模剂 | 型号: | 6s干 性 中性 油性脱模剂 |
规格: | 450ml/500ml | 商标: | 6s |
包装: | 24支/1箱 | 产量: | 896886 |
“胡氏6S油性脱模剂塑粒内外脱模剂模具清洗剂诚招代理商”详细介绍
脱模剂 (450ml):可使用于所有热塑性树脂,亦可使用于需要二次加工(丝印,涂漆,电镀,印刷,热模压印)的制品。本品内含压力气体LPG),勿近火源,不得刺破或抛火中,储存温度不得高于50度。
MOULD RELEASE 450mlCan be used in all thermoplastic resin, can also be used to need a second processing (printing, coating, electroplating, printing, hot moulded printed) of the products. This product contains pressure gas LPG), don't close to fire, shall not be punctured or throw fire, storage temperature shall not be higher than 50 degrees.INSTRUCTION FOR USE:shake before usespray at a distance of approx.20-25cmote:donot keep at temperature above 120degreeContents under pressure.Do not puncture or incinerate can Donot spray into open flame
模具清洗剂特点:(450ML)迅速清洗干净油污,油脂及其它顽固污渍特别适用于清洗工模或其它金属表面上的防锈膏。完全挥发,不留痕变,对金属表面无腐蚀。无毒,无恶劣刺激气味,对人体无害。用法:距被喷物约20~30CM喷射,若需深入物件的内部或也隙可接驳喷管垂直喷射,不可倒转使用警告:易燃物,使用时远离高温、火焰,不准吸烟,确保空气流通,严禁敲击;请勿置于50度以上的地方,不可曝晒、不可刺穿或抛进火里;严禁吞服避免儿童触及。
HIGH EFFIEIENCY MOULD CLEANER(450ML)
Quickly clean oil, grease and other stubborn stains
Especially suitable for cleaning the mold, or other metal surface rust cream.
Fully, not in evidence, no corrosion to metal surface.
Non-toxic, no bad odour, harmless to the human body.
Usage:
About 20 ~ 30 cm injection by spraying material, if need further objects of internal or gap can hook nozzle
Vertical injection, unidirectional use
Warning:
Flammable, away from heat, flame, when using, no smoking, ensure that the air circulation, it is forbidden to knock; Please do not put in more than 50 degrees, do not insolate, do not Pierce or thrown into the fire; It is forbidden to swallow to avoid children to touch.